Looking to get a 3D Model Printed and don't have access to a 3D printer? We provide both FDM and MSLA Printing with machines of various sizes!

To get a quote just send your file* to printmecrazyuk@gmail.com along with a few details about your print (requirements below) and we'll get back to you as soon as possible!

Collapsible content

Please Read!

To give you an accurate quote, please send along the following information with your email.

-Name

-Purpose (Business/Personal Use)

-Material

-Colour (see below section for options)

-Quantity

-Turn-around time (if applicable)

*If the files are too large for email, please use a service like WeTransfer or Dropbox to share the files.

For further details regarding custom orders please refer to section 5 of our Terms of Service.

FDM (Filament) Printing Specs

Minimum order total £10

Max Print Size: 350mm x 350mm x 380mm

Default layer height is 0.2mm with 3 Perimeter walls, 10% Infill.

Printing tolerances are ±0.5% (± 0.5 mm)

The print will be an unfinished/unpainted item with the expectation of having to finish the item yourself, whether that be sanding, priming or painting.

MSLA (Resin) Printing Specs

Minimum order total £30

Models provided which are not already pre-supported or require modification to existing supports will incur a £10 charge, this would be applied once per order, not per model.

Max Print Size: 190mm x 110mm x 185mm

Default layer size is 0.05mm and hollowed model wall thickness is 2mm.

Printing tolerances are ±0.5% (± 0.15mm)

The print will be an unfinished/unpainted item with the expectation of having to finish the item yourself, whether that be sanding, priming or painting. Larger prints may be printed hollow and will have drainage holes in less obvious spots that might need filling dependant on use.

Available Colours

The colour of the material can affect the printing process, especially resin. Below is a list of colours for each material that we have in use at the moment.

If the colour you need is not on the list, send us a message and we may be able to help!

FDM:

PLA: Grey (Default), we also have a constantly changing range of colours available, contact us for an up to date list.

PETG: Black (Default), White.

MSLA:

Grey (Default), Black

1 of 5