Looking to bring your 3D designs to life but don't have access to a 3D printer? No problem! We offer FDM and MSLA printing with machines of various sizes.
Simply send your file* to email@example.com along with a few details about your print (requirements below) to get a quote, and we'll work with you to make it happen.
To ensure we provide you with the most accurate quote, please include the following information in your email:
- Your name
- Desired material for printing
- Preferred color (see below section for available options)
- Required quantity of prints
- Turnaround time (if applicable)
*If the files are too large for email, please use a service like WeTransfer or Dropbox to share the files.
For further details regarding custom orders please refer to section 5 of our Terms of Service.
FDM (Filament) Printing Specs
Minimum order total £10
Max Print Size: 350mm x 350mm x 380mm
Default layer height is 0.2mm with 3 Perimeter walls, 10% Infill.
Printing tolerances are ±0.5% (± 0.5 mm)
Please note that the 3D print will be provided in its raw state and may require post-processing such as sanding or painting.
MSLA (Resin) Printing Specs
Minimum order total £30
Models provided which are not already pre-supported or require modification to existing supports will incur a £10 charge, this would be applied once per order, not per model.
Max Print Size: 190mm x 110mm x 185mm
Default layer size is 0.05mm and hollowed model wall thickness is 2mm.
Printing tolerances are ±0.5% (± 0.15mm)
Please note that the 3D print will be provided in its raw state and may require post-processing such as sanding or painting. For larger prints, we may print them hollow to minimize the weight, reduce the printing time and prevent issues during the printing process. These prints will also have drainage holes, which may require filling depending on your intended use.
The colour of the material can affect the printing process, especially resin. Below is a list of colours for each material that we have in use at the moment.
If the colour you need is not on the list, send us a message and we may be able to help!
PLA: Grey (Default), Black, Blue, Green, Pink, Purple and Red. We also have a constantly changing range of Silk (Shiny) colours available, contact us for an up to date list.
PETG: Black (Default), White.
Grey (Default), Black